MLQ2-16A-125A Single Phase Din Rail ATS for PV and inverter Dual Power Automatic Transfer Selector Switches Uninterrupted
MLQ2-16A-125A Single Phase Din Rail ATS for PV and inverter Dual Power Automatic Transfer Selector Switches Uninterrupted
Ensure uninterrupted power supply for your PV system with our MLQ2-16A-125A Single Phase Din Rail ATS. As a factory, we guarantee quality and reliability.
normal working conditions Ambient air temperature: the highest temperature is not more than 40°C, the lowest is not lower than-5° C, and the average temperature within 24 hours is not higher than 35C Altitude: The altitude of the installation site should not be higher than 2000m Atmospheric conditions: When the highest temperature reaches 40° C, the relative humidity of the installation site should not exceed 50%; whenthe temperature is the lowest temperature-5·C, the relative humidity is relatively high, for example: the temperature is 25·C, and the relative humidity is 90%. Due to temperature changes, speclal measures should be taken to deal with occasional condensation on the surface of the product. Pollution level: Pollution level complies with GB/T14048.11 specified level3 Installation level: the installation type conforms to the category specified in GB/T14048.11 Installation conditions: It can be installed vertically in the control cabinet or power distribution cabinet. Make sure that the installation distance meets the requirements in Figure 1.
